Lighten/Darken - Xerox DocuPrint M205 b User Manual

Lighten/Darken

You can adjust the copy density level to make the copy lighter or darker than the original.
1
For the DocuPrint M205 f/M205 fw, load the document(s) face up with top edge in first into the
ADF or place a single document face down on the document glass, and close the document
cover.
For the DocuPrint M205 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M205 f/M205 fw Only)" on page 194
• "Making Copies From the Document Glass" on page 192
2
Press the (Copy) button.
3
Select Lighten/Darken, and then press the
4
Select the desired setting, and then press the
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
Lighter2
Lighter1
Normal*
Darker1
Darker2
5
If necessary, customize the copy settings including the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 195
6
Press the (Start) button to begin copying.
button.
button.
Makes the copy lighter than the original. Works well with dark print.
Works well with standard type or printed documents.
Makes the copy darker than the original. Works well with light print or
faint pencil markings.
Copying 202