Table of Contents
Advertisement
3
Host Address (IP
Address or DNS Name)
4
Port Number
5
Login Name (if required
by host)
6
Login Password
7
Re-enter Password
8
Name of Shared
Directory
9
Subdirectory Path
(optional)
After you configured settings, go to
239
Scanning
Enter a server name or IP address of your computer or the FTP
server that you have shared out.
The following are examples:
•
For Server FTP:
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address: 192.168.1.100
•
For Computer SMB:
Server name: myhost
IP address: 192.168.1.100
Enter the server port number. If you are unsure, you can enter the
default value of 21 for FTP and 139 for SMB.
Enter the user account name that has access to the shared folder on
your computer or FTP server.
Enter the password corresponding to the above login name.
NOTE:
•
Empty password is not valid in the Scan to Computer feature.
Ensure that you have a valid password for the user login account.
(See
"Confirming a Login name and Password" on page 223
details on how to add a password in your user login account.)
Re-enter your password.
For Computer SMB only.
On the Windows operating system, enter the share name of the folder
to store the scanned document on the recipient computer.
On the Mac OS, enter the folder name to store the scanned document
on the recipient computer.
For Computer SMB
To store the scanned document in the share folder directly without
creating any subfolder, leave the space blank.
To store the scanned document in the folder you created under the
share folder, enter the path as following.
Example: Share Folder name: MyShare, Second-level folder name:
MyPic, Third-level folder name: John
You should now see MyShare\Mypic\John in your directory.
MyShare (Share folder)
MyPic
John
In this case, enter the following item.
Server Path: \MyPic\John
For Server FTP
Enter the server path to store the scanned document.
"Sending the Scanned File to the Network" on page
for
243.
Advertisement
Table of Contents
