Table of Contents
Advertisement
5
Enter the IP address of the printer in the address bar, and then press the Enter key.
CentreWare Internet Services appears.
6
Change the wireless setting of the printer on CentreWare Internet Services.
7
Reboot the printer.
8
Restore the wireless settings on your computer.
NOTE:
•
If the operating system on your computer provides a wireless configuration software, use it to change the
wireless settings. Or you can change the wireless settings using the tool provided with the operating
system. See the instructions below.
For Windows XP and Windows Server 2003:
Select Network Connections from Control Panel.
a
Right-click Wireless Network Connection and select Properties.
b
Select Wireless Networks tab.
c
Ensure that the check box for Use Windows to configure my wireless network settings is
d
selected.
Click Advanced.
e
You can either set the printer to the ad-hoc mode or the infrastructure mode.
f
•
For Ad hoc mode:
Select Computer-to-computer (ad hoc) networks only and close the dialog box.
•
For Infrastructure mode:
Select Access point (Infrastructure) networks only and close the dialog box.
Click Add to display Wireless network properties.
g
Enter the setting that you will send to the printer and click OK.
h
117
Printer Connection and Software Installation
Advertisement
Table of Contents
