Table of Contents
Advertisement
WPS
NOTE:
•
This item is displayed only when the printer is connected with a wireless network.
• Reset Wireless (DocuPrint M205 fw Only)
Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all
wireless network settings are reset to their factory default values.
Values:
No*
Yes
NOTE:
•
This item is displayed only when the printer is connected with a wireless network.
• TCP/IP
Purpose:
To configure TCP/IP settings. The change becomes effective after the printer is turned off and then on.
Values:
IP Mode
IPv4
NOTE:
•
To configure the IPv6 settings, use CentreWare Internet Services.
321
Using the Operator Panel Menus and Keypad
Push Button
PBC Start
Control
PIN Code
Start
Configuration
Print PIN Code Prints the PIN code. Confirm it when you enter the
Does not reset the wireless setting.
Resets the wireless setting.
Dual Stack*
IPv4
Get IP
Auto IP*
Address
BOOTP
RARP
DHCP
Panel
IP Address
Subnet Mask
Gateway Address
No*
Disables the security method of
WPS-PBC.
Yes
Configures the wireless setting
with the security method of WPS-
PBC.
Configures the wireless setting using the PIN code
assigned automatically by the printer.
PIN code to your computer.
Uses both IPv4 and IPv6 to set the IP address.
Uses IPv4 to set the IP address.
Automatically sets the IP address.
Uses BOOTP to set the IP address.
Uses RARP to set the IP address.
Uses DHCP to set the IP address.
Enables the IP address entered on the operator
panel.
Manually sets the IP address allocated to the
printer.
Manually sets the subnet mask.
Manually sets the gateway address.
Advertisement
Table of Contents
