Table of Contents
Advertisement
Understanding Printer Messages
The printer LCD panel displays messages describing the current state of the printer and indicates
possible printer problems you must resolve. This section describes error codes included in the
messages, their meanings, and how to clear the messages.
IMPORTANT:
•
When an error message is displayed, the print data remaining on the printer and the information accumulated
in the memory of the printer are not secured.
Error Code
005-121
005-301
010-397
016-315
016-317
016-372
016-501
016-502
016-503
016-504
016-506
016-507
016-718
016-719
016-720
016-744
016-745
016-749
016-764
016-766
016-767
016-791
What You Can Do
Open the ADF cover. Remove the jammed paper and then close the ADF cover.
See also:
• "Clearing Paper Jams From the ADF (DocuPrint M205 f/M205 fw)" on page 365
Close the ADF cover.
Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorised dealer.
See also:
• "Online Services" on page 447
Press the
button to clear the message. Check if the SMTP server setting is correct
by contacting your server administrator.
Press the
button to clear the message. Check if the user name and password for the
POP3 server are set correctly by contacting your server administrator.
Press the
button to clear the message. Check if the SMTP server address and e-
mail destination are set correctly.
Press the
button to clear the message. Check if the user name and password used
for the SMTP server are set correctly by contacting your server administrator.
Press the
button to clear the message. Retry when the printer does not process any
job.
Press the
button to cancel the current job. Retry when the printer does not process
any job.
Press the
button to clear the message. If this does not solve the problem, contact the
Fuji Xerox local representative office or an authorised dealer.
See also:
• "Online Services" on page 447
Press the
button to cancel the current job. Retry when the printer does not process
any job.
Press the
button to clear the message. Check if the Ethernet cable is properly con-
nected. If this does not solve the problem, contact SMTP server administrator.
Press the
button to clear the message. Ping the IP address of the SMTP server and
check if the server is available. If this does not solve the problem, contact SMTP server
administrator.
Press the
button to clear the message. Check if the recipient address is correct, and
try scanning again.
Insert the USB memory device and press the
button to clear the message.
Troubleshooting
402
Advertisement
Table of Contents
