Table of Contents
Advertisement
Adjusting the Dynamics (Dynamics)
The way in which the Vocal Designer/Vocoder dynamics will respond to changes in the microphone input volume can be ad-
justed over a range of seven levels. Changes you make in this value are stored in the unit.
Decreasing the dynamics effect means that the Vocal Designer/Vocoder will be able to produce a wide range of sounds from
loud to soft, giving you more expressive range. However, this will require you to accurately control the volume of your voice as
you sing into the microphone.
Increasing the dynamics effect means that the Vocal Designer/Vocoder sound will vary less in volume, but this will make it easier
for you to sing, since a stable volume will be obtained even if your voice increases or decreases in volume.
1. Press and hold the [Bypass] button for two seconds .
The [Bypass] button will blink.
2. Press one of the sound buttons to select the desired dynamic level .
You can choose from seven levels for dynamics, which correspond to the following buttons.
Button name
Female Choir
Kids Choir
Gregorian Choir
Jazz Scat
Duet
Trio 1
Trio 2
3. Press the [Bypass] button .
The VP-7 will return to its normal state.
Applying Ambience (Ambience)
You can apply ambience (reverberation) to the direct sound from the microphone and to the Human Voice/Vocal Designer/
Vocoder sound, producing the impression of a performance in a concert hall.
The Ambience effect will increase as you turn the [Ambience] knob toward the right.
Reverb is applied in the left half of the knob's range. Turning the knob toward the right of center will add an echo in addition to
the reverb.
Setting
OFF
Dynamics will not be applied; it will be easy for you to produce expressive change.
1
2
(When shipped from the factory)
3
4
5
6
Dynamics will be maximized; the volume will be stable, making it easier for you to song.
An echo effect
Reverb
is applied
Min
Max
25
Advertisement
Table of Contents
