Multi-Effects Parameters - Roland SuperNATURAL ARX-01 Owner's Manual

Multi-Effects Parameters

Each multi-effect has "Control Assign" parameters. These indicate the
parameters that can be controlled via "Multi-effect control (Effects/MFX
Ctrl screen)" (p. 29).
For details on the "note" that can be selected for some parameter, refer
to "About Note" (p. 67)
In the parameter list below, an indication of "#1"–"#4" follows the
name of parameters that are selected for Control Assign by default.
01: STEREO EQ (Stereo Equalizer)
This is a four-band stereo equalizer (low, mid x 2, high).
fig.MFX01
L in
4-Band EQ
R in
4-Band EQ
Parameter Value
Low Freq 200, 400 Hz
Low Gain #1 -15– +15 dB
2000, 4000,
High Freq
8000 Hz
High Gain #4 -15– +15 dB
Mid1 Freq 200–8000 Hz
0.5, 1.0, 2.0,
Mid1 Q
4.0, 8.0
Mid1 Gain #2 -15– +15 dB
Mid2 Freq 200–8000 Hz
0.5, 1.0, 2.0, 4.0,
Mid2 Q
8.0
Mid2 Gain #3 -15– +15 dB
Level 0–127
L out
R out
Description
Frequency of the low range
Gain of the low frequency range
Frequency of the high range
Gain of the high frequency range
Frequency of Middle Range 1
Width of Middle Range 1
Select a higher Q value to narrow Mid-
dle Range 1.
Gain of Middle Range 1
Frequency of Middle Range 2
Width of Middle Range 2
Select a higher Q value to narrow Mid-
dle Range 2.
Gain of Middle Range 2
Output level
35