Creating A Patch; Main Screen; Patch Selection And Indicator - Roland SuperNATURAL BRASS ARX-03 Owner's Manual

Creating a Patch

About this manual
• The screen images used in this manual are taken from a Fantom-G with the ARX-03 installed. The various procedures described also
assume that you are using the ARX-03 installed in a Fantom-G.
• For details on how to move the cursor or edit a value, refer to the owner's manual for the device in which you've actually installed the
ARX-03.

Main Screen

This screen is used mainly to select patches.
By changing the Player Select setting you can switch between
playing the section (ALL) or playing a solo (1–6).

Patch Selection and Indicator

Move the cursor to PATCH Number/Name and change the value to
select a patch (001–050).
fig.01-004.eps
PATCH Number/Name
1
2
3
4
5
6 7
The indicators show the following information.
No. Indicator
1 L/R Level Indicator Left/right levels of the sound
2 Player Indicator The players that are currently playing will be lit
Section Group The indicators will be lit at the same height for
3
Indicator players in the same group
Section Play Mode
4 Play mode status *1
Indicator
5 Variation Indicator Performance variation status *1
6 MFX Switch Turns the multi-effect on/off *2
7 Reverb Switch Turns the reverb on/off *2
*1 This setting cannot changed in the main screen. You can adjust
this in "Playing settings (Section Style screen)" (p. 29)
These Parameters can be controlled using a specified controller
(p. 39).
*2 This setting cannot changed in the main screen. You can adjust
this in "Applying effects (Routing screen)" (p. 33)
Description
23