Memory Names; D Editing (Programming) Memory Names; Memory Clearing - Icom ic-7700 Instruction Manual

8
MEMORY OPERATION

■ Memory names

D Editing (programming) memory names

/ /
123 Symbol ABC abc
Ω ≈
F-1 F-2

■ Memory clearing

(CLR)
F-5
DEL
Keypad
F-3
SPACE
F-4
CLR
F-5
Beep
Hold down for 1 sec.
Beep
Beep
All memory channels (including scan edges) can be
tagged with alphanumeric names of up to 10 charac-
ters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ' ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } | _
and spaces can be used.
q Push EXIT/SET
tion screen, if necessary.
w Push [MEMORY]
e Select the desired memory channel.
r Push [NAME] F-4
• A cursor appears and blinks.
• Memory channel names of blank channels cannot be
edited.
t Input the desired character by rotating the main dial
or by pushing the keypad for number input.
• Push [ABC] or [abc] to toggle capital and small letters.
• Push [123] or [Symbol] to toggle numerals and symbols.
• Push [t] or [u]
F-1
• Push [DEL]
F-3
• Push [SPACE]
F-4
• Pushing the transceiver's keypad, [0]–[9], can also
enter numerals.
y Push EXIT/SET to input and set the name.
• The cursor disappears.
u Repeat steps e to y to program another memory
channel's name, if desired.
i Push EXIT/SET to exit memory list screen.
✔ For your convenience
When a PC keyboard is connected to [USB] connec-
tor on the front panel, the memory name can also be
edited from the keyboard.
Any unused memory channels can be cleared. The
cleared memory channels become blank channels.
q Select memory mode with
w Push [MEMORY]
e Select the desired memory channel with ∫ / √ .
r Hold down [CLR]
contents.
• The programmed frequency and operating mode disap-
pear.
t To clear other memory channels, repeat steps e
and r.
8-6
several times to close a multi-func-
to select memory list screen.
F-4
to edit memory channel name.
for cursor movement.
F-2
to delete the selected character.
to input a space.
.
V/M
F-4 to select memory list screen.
for 1 second to clear the
F-5
~
@)