Sending A Recorded Message; D Transmit Level Setting - Icom IC-7000 Instruction Manual

■ Sending a recorded message

q Select S-1.
w Push [F-1 VO] to call up the voice recorder menu.
• If the receive voice memory channels screen appears,
push [Z( )] then push [F-2 TX] to select the
/
MENU GRP
transmit voice memory channel.
• If the voice root menu appears, push [F-2 TX] to select
the transmit voice memory menu. The voice recorder
starting menu can be changed in the miscellaneous
(others) set mode.
e Push [F-1 T1] — [F-4 T4] to transmit the con-
tents.
• "T1"– "T4" are highlighted while transmitting.
r Push the selected memory channel key, [F-1 T1]
— [F-4 T4], again to stop, if desired.
t Push [Z(
)] twice to exit the voice mem-
/
MENU GRP
ory screen.
For your information
When an external keypad is connected to the pin 3
and pin 7 of the [MIC] connecter, the recorded
message, T1–T4, can be transmitted without open-
ing the voice recorder set screen.
See page 137 for details.

D Transmit level setting

q Call up the voice memory recording mode as de-
scribed in steps q to w as above.
w Push [Y( )] to select the voice memory
/
MENU GRP
transmit level set mode.
e Push the desired memory channel key, [F-1 T1] –
[F-3 T3], momentarily to transmit the contents.
r Rotate [DIAL] to adjust the transmit voice level.
• Push [F-4 DEF] to select the default condition.
t Push [Z( )] to return to the voice recorder
/
MENU GRP
screen.
VOICE RECORDER FUNCTIONS
[F-1]
[MENU/GRP] [F-2] [F-3] [F-4]
7
7
100