Leveled Sine Wave Specifications; Time Marker Specifications; Wave Generator Specifications - Fluke 5522A Operator's Manual

Leveled Sine Wave Specifications

Leveled Sine Wave
Characteristics into 50
Amplitude Characteristics (for measuring oscilloscope bandwidth)
Range (p-p)
Resolution
Adjustment Range
1-Year Absolute
Uncertainty, tcal 5 C
Flatness (relative to
50 kHz)
Short-Term Amplitude
Stability
Frequency Characteristics
Resolution
1-Year Absolute
Uncertainty, tcal 5 C
Distortion Characteristics
2nd Harmonic
3rd and Higher Harmonics
[1] Within 1 hour after reference amplitude setting, provided temperature varies no more than 5 °C.
[2] With REF CLK set to ext, the frequency uncertainty of the Leveled Sine Wave is the uncertainty of the external 10 MHz clock
0.3 Hz/gate time.

Time Marker Specifications

Time Maker into 50
1-Year Absolute
Uncertainty at Cardinal
ppm
Points, tcal 5 C
Wave Shape spike or square
Typical Output Level >1 V p-p
Typical Jitter (rms) <10 ppm
Sequence 5-2-1 from 5 s to 2 ns (e.g., 500 ms, 200 ms, 100 ms)
[3]
Adjustment Range
At least 10 % around each sequence value indicated above.
Amplitude Resolution 4 digits
[1] t is the time in seconds.
[2] Typical rise time of square wave and 20 %-pulse (20 % duty cycle pulse) is < 1.5 ns.
[3] Time marker uncertainty is 50 ppm away from the cardinal points.

Wave Generator Specifications

Wave Generator Characteristics
Amplitude
Range
1-Year Absolute Uncertainty, tcal 5 C,
10 Hz to 10 kHz
Sequence
Typical DC Offset Range
Frequency
Range
Resolution
1-Year Absolute Uncertainty, tcal 5 C
[1] The DC offset plus the wave signal must not exceed 30 V rms.
50 kHz (reference) 50 kHz to 100 MHz
(2 % of output (3.5 % of output
+ 300 V) + 300 V)
not applicable
(1.5 % of output
+ 100 V)
1 kHz
20 ms to
5 s to 50 ms
100 ns
(25 + t *1000)
2.5 ppm
[1]
spike, square,
or 20 %-pulse
[2] [2]
>1 V p-p
<1 ppm
into 1 M :
into 50 :
(3 % of p-p output + 100 µV)
1-2-5 (e.g., 10 mV, 20 mV, 50 mV)
0 to ( 40 % of p-p amplitude)
10 Hz to 100 kHz
4 or 5 digits depending upon frequency
(25 ppm + 15 mHz)
SC600 Oscilloscope Calibration Option
Frequency Range
100 to 300 MHz
5 mV to 5.5 V
<100 mV: 3 digits
100 mV: 4 digits
continuously adjustable
(4 % of output
+ 300 V)
(2 % of output
+ 100 V)
[1]
1 %
[2]
2.5 ppm
-33 dBc
-38 dBc
50 to 20 ns 10 ns
2.5 ppm 2.5 ppm
spike or square square or sine
[2]
>1 V p-p >1 V p-p
<1 ppm <1 ppm
Square Wave, Sine Wave, and Triangle Wave
into 50 or 1 M
1.8 mV to 55 V p-p
1.8 mV to 2.5 V p-p
[1]
General Specifications
300 to 600 MHz
(6 % of output
+ 300 V)
(4 % of output
+ 100 V)
10 kHz
5 to 2 ns
2.5 ppm
sine
[2]
>1 V p-p
<1 ppm
9
9-5