Fluke 5522A Operator's Manual page 112

5522A
Operators Manual
7. Press
8. Press
The entered temperature will be cleared to 0 C (32 F) if you change
between tc and rtd, or change the type of thermocouple (except for a type B
thermocouple, which clears to 600 C C). If this should occur, select
OUTPUT tc, the desired thermocouple TYPE, and then reenter the
temperature.
4-36
. The calibrator clears your entry from the Control Display and copies it
into the Output Display (below is typical).
to activate the calibrator output. Four softkey labels appear on the Control
Display.
Note
nn102f.eps
nn103f.eps