Chapter 3: Upgrading The Summit Wm Controller From V5R3 To V5R3 General Patch (Gp); Upgrading The Software From V5R3 To V5R3 Gpx On The Summit Wm20/200/2000 Controller Via The Gui - Extreme Networks Summit WM Maintenance Manual

3 Upgrading the Summit WM Controller from
V5R3 to V5R3 General Patch (GP)
This chapter describes how to upgrade the Summit WM Controllers from V5R3 to V5R3 GP release.
The topics in this chapter are organized as follows:
Upgrading the software from V5R3 to V5R3 GPx on the Summit WM20/200/2000 Controller via the
●
GUI
Upgrading the software from V5R3 to V5R3 GP on the Summit WM100/1000 Controller via the GUI
●
Backing up the Summit WM Controller database
●
Restoring the Summit WM Controller database
●
Upgrading a Summit WM Controller using SFTP
●
Working with a CF card
●
Upgrading the software from V5R3 to V5R3 GPx on the
Summit WM20/200/2000 Controller via the GUI
The Summit WM Software provides two upgrade options in Summit WM20/200/2000 Controller.
Local – A local upgrade involves upgrading the Summit WM Controller using an image file (.tar)
●
that is located on the Summit WM Controller or CF card.
Remote – A remote upgrade involves upgrading the Summit WM Controller using an image file that
●
is located on an external FTP server. If the image file (.tar) you want is located on an external FTP
server, you have the following two options:
Launch the upgrade with the image file remaining on the external FTP server.
●
First download the remote image file onto the Summit WM Controller or CF card, and then
●
perform the Summit WM Controller upgrade.
Summit WM Maintenance Guide, Software Version 5.3
39