Extreme Networks Summit WM Maintenance Manual page 53

3 Click the Restore tab.
The Available Backups list displays items that have already been backed up and are available.
4 In the Restore section, click the backup configuration you want to restore from the Select a backup
to restore drop-down list.
NOTE
If the backup you want to install is a Summit WM Controller configuration, click the .cli backup file in the list.
5 To restore the backup configuration, click Restore Now. A dialog is displayed informing you that the
restore process requires rebooting the Summit WM Controller.
6 Click OK to continue.
7 Review the restore settings in the dialog box that is displayed. If correct, click OK to confirm the
restore. The Software Maintenance window is displayed, providing the status and results of the
restore.
8 Reboot your system.
To download a backup from an FTP server for a restore:
1 From the main menu, click Summit WM Controller. The Summit WM Controller page is displayed.
2 From the left pane, click Software Maintenance. The System Maintenance page is displayed.
3 Click the Restore tab.
4 To download a backup for a restore, type the following:
FTP Server –The FTP server to retrieve the backup file from.
●
User ID – The user ID used to log in to the FTP server.
●
Password – The corresponding password for the user ID.
●
Confirm – The corresponding password for the user ID to confirm it was typed correctly.
●
Summit WM Maintenance Guide, Software Version 5.3
53