Maintaining the Summit WM Controller
Powering off the Summit WM200/2000 Controller
To power off the Summit WM200/2000 Controller:
1 Login on the Summit WM200/2000 Controller.
2 From the main menu, click Summit WM Controller. The Summit WM Controller page is displayed.
3 Under System Shutdown, select Halt System, and then click Apply Now. The following dialogue
box is displayed.
4 Click OK. The software's operations is halted and you are logged out of the system.
NOTE
An alternative method of stopping the software operation is to use the CLI commands. For more information, see
the Summit WM CLI Reference Guide.
5 Switch off the Summit WM200/2000 Controller's power switches, located on the back panel. The
Summit WM200/2000 Controller is now completely powered off.
120
Summit WM Maintenance Guide, Software Version 5.3