Extreme Networks Summit WM Maintenance Manual page 64

Restoring the backed-up image
NOTE
To enter the Rescue mode, you must connect to the Console serial port. You can not enter the Rescue mode
using the ESA ports.
a Use the serial port of the Summit WM200/2000 Controller to connect to the console.
NOTE
To enter the Rescue mode, you must connect to the serial port. You can not enter the Rescue mode by
connecting to the ESA ports.
b Reboot the Summit WM Controller. The following menu appears during the reboot process.
c Select Rescue Ac Start-up, and then press Enter. The first repairFS script runs after the OS
initialization.
Attempting to Repair AC_Original Filesystems
This may take several minutes.
Repairing / of the original fs:
fsck 1.27 (8-Mar-2002)
/: 41649/3417568 files (0.7% non-contiguous), 284504/6825609 blocks
Repairing /home of the original fs:
fsck 1.27 (8-Mar-2002)
/home: 21/256512 files (0.0% non-contiguous), 16277/512064 blocks
Repairing /var/controller/log/cdr
fsck 1.27 (8-Mar-2002)
/var/log/extreme: 11/256512 files (0.0% non-contiguous), 16264/512071 blocks
Repairing /var/controller/log/logs
fsck 1.27 (8-Mar-2002)
/var/log/extreme1: 26/192000 files (11.5% non-contiguous), 14315/383544 blocks
Repairing /var/controller/log/reports
fsck 1.27 (8-Mar-2002)
/var/log/extreme2: 11/192000 files (0.0% non-contiguous), 14240/383544 blocks
Repairing /var/controller/log/trace
fsck 1.27 (8-Mar-2002)
/var/log/extreme3: 11/192000 files (0.0% non-contiguous), 14240/383544 blocks
repairFS: finished!
64
Please do not reboot the system
Summit WM Maintenance Guide, Software Version 5.3