Backing Up The Existing V4R1 Gp7 Image On The Summit Wm100/1000 Controller - Extreme Networks Summit WM Maintenance Manual

Backing up the existing image
NOTE
Any FTP parameter can be changed from this menu by entering the corresponding parameter number and then
entering the new value for the parameter.
NOTE
The file name must end with .tgz extension.
c Enter 7 to return to the main menu.
6 Create a backup image.
To create a backup image:
a In the Rescue menu, press 6.
Your choice> 6
NOTE
You must ensure that the Interface and FTP settings are entered correctly.
The following are the examples of the string.
IP: 192.168.1.211 netmask 255.255.255.0 gateway: 192.168.1.1
FTP Settings: IP 192.168.3.10, port 21, user: ftpadmin, password: abc123, directory:
builds/ac/mainBackup/file itest.tgz
Do you wish to continue with system backup (Y/N)?
Answer Y
The system now creates a backup image by creating an exact copy of the system
partitions.
NOTE
The time for creating a backup image varies between 12 to 15 minutes.
Backing up the existing V4R1 GP7 image on the Summit WM100/
1000 Controller
The V4R1 GP7 image is not backed-up from the GUI or CLI, but from a low-level menu presented
shortly after the system boots.
NOTE
You must use the serial connection to the Summit WM100/1000 Controller to back up the V4R1 GP7 image.
NOTE
The procedure starts with a reboot.
12
Summit WM Maintenance Guide, Software Version 5.3