Extreme Networks Summit WM Maintenance Manual page 11

NOTE
The base directory is the home directory of the user ftpadmin. To use a directory from the root of the FTP server
you must add an extra /:, such as:
ftp://ftpadmin:passwd@192.168.3.10:21///home/user/backup.tgz
NOTE
You must have the write permission for the FTP Server and the specified FTP directory.
4 Check Network settings.
To check the Network settings:
a In the Rescue mode, press 4. The following menu is displayed:
Your choice> 4
NETWORK SETTINGS
----------------
1) Assign ip address
2) Assign netmask
3) Assign default gateway ip address
4) Display current settings
5) Setup interface
6) Test interface by ICMP (ping)
7) Return to the main menu
Your choice:
b Enter 4 to display the current settings.
NOTE
Any network parameter can be changed from this menu.
c Test the interface by entering 6, followed by some IP address that is reachable from the controller.
d Enter 7 to return to the main Rescue menu.
5 Check the FTP settings.
To check the FTP settings:
a In the Rescue menu, press 5. The following menu is displayed.
Your choice> 5
FTP SETTINGS
----------------
1) Assign ftp server ip address
2) Assign user name
3) Assign password
4) Assign ftp directory
5) Assign file name
6) Display current settings
7) Return to the main menu
Your choice:
b Enter 6 to display the current FTP settings.
Summit WM Maintenance Guide, Software Version 5.3
11