Scheduling A Backup - Extreme Networks Summit WM Maintenance Manual

Scheduling a backup

When you schedule a backup, you can either chose to save the backup to an FTP server or have the
scheduled backup saved on your system.
NOTE
If you do not specify an FTP server in the Schedule Backups window when you define the backup schedule, the
backup is added to the Available Backups list on the Backup tab.
To schedule a backup:
1 From the main menu, click Summit WM Controller. The Summit WM Controller page is displayed.
2 From the left pane, click Software Maintenance. The SWM Software tab is displayed.
3 Click the Backup tab.
4 Click Schedule Backup. The Schedule Backups page is displayed.
5 In the What to backup drop-down list, click what you want to backup:
Config's, CDRs, Logs, Audit and Rogue
●
Configurations only
●
CDRs only
●
Logs only
●
Audit only
●
Rogue only
●
6 In the Schedule task drop-down list, click the frequency of the backup:
Daily – Click the Start Time and Recurrence for the backup.
●
Weekly – Click the Start Time and Recurrence for the backup.
●
Monthly – Click the Start Time and Recurrence for the backup.
●
Never – Click to make the scheduled backup a one-time event.
●
7 If applicable, specify an FTP server to where the scheduled backup will be copied to. In the FTP
settings section, type the following:
FTP Server – The IP of the FTP server to where the scheduled backup will be copied to.
■
Summit WM Maintenance Guide, Software Version 5.3
51