Deleting A Software Image; Upgrading The Software From V5R3 To V5R3 Gp On The Summit Wm100/1000 Controller Via The Gui46 - Extreme Networks Summit WM Maintenance Manual

Upgrading the Summit WM Controller from V5R3 to V5R3 General Patch (GP)

Deleting a software image

You can delete a software image if it is no longer needed on your system.
To delete a software upgrade:
1 From the main menu, click Summit WM Controller. The Summit WM Controller page is displayed.
2 From the left pane, click Software Maintenance. The SWM Software tab is displayed.
3 In the Select upgrade list, click the software upgrade you want to delete.
4 Click Delete selected.
5 In the dialog box that is displayed, click OK to confirm the deletion of the upgrade. The Software
Maintenance window is displayed, providing the status and results of the deletion.
Upgrading the software from V5R3 to V5R3 GP on the
Summit WM100/1000 Controller via the GUI
You can upgrade Summit WM Controller software by using a local image file (.tar) that is located on the
Summit WM Controller.
NOTE
The Summit WM100/1000 Controller does not support remote upgrades. If the image file (.tar) you want is located
on an external FTP server, you must first download the image file onto the Summit WM Controller before you begin
the upgrade.
46
Summit WM Maintenance Guide, Software Version 5.3