8
Summit WM Controller's utilities
The topics in this chapter are organized as follows:
Using controller utilities
●
Configuring Check Point event logging
●
Enabling SNMP
●
Using controller utilities
You can use Summit WM Controller utilities to test a connection to the target IP address and record the
route through the Internet between your computer and the target IP address. In addition, you can also
use Summit WM Controller utilities to capture exception traffic, which can be useful for network
administrators when debugging network problems.
To test or record IP address connections:
1 From the main menu, click Summit WM Controller. The Summit WM Controller page is displayed.
2 In the left pane, click Utilities. The Summit WM Controller Utilities page is displayed.
3 In the Target IP Address box, type the IP address of the destination computer.
4 To test a connection to the target IP address, click Ping. A pop-up window is displayed with the
ping results.
The following is an example of ping results.
5 To record the route through the Internet between your computer and the target IP address, click
Trace Route.
Summit WM Maintenance Guide, Software Version 5.3
99