Extreme Networks Summit WM Maintenance Manual page 21

NOTE
You can use the Network Interface menu options from 3 to 5 (IP, Netmask, and default gateway) one at a time.
4 Press Enter. The following screen is displayed.
ip is 192.168.1.210 netmask is 255.255.255.0
Configuring interface ...
Setting up network interface ... Done!
<< Press any key to return to previous menu. >>
5 Test the interface.
To test the interface:
a Enter 6 in the Network Interface menu.
PING 192.168.3.10 (192.168.3.10) from 192.168.1.210 : 56(84)
bytes of data.
64 bytes from 192.168.3.10: icmp_seq=1 ttl=63 time=2.49 ms
64 bytes from 192.168.3.10: icmp_seq=2 ttl=63 time=0.881 ms
64 bytes from 192.168.3.10: icmp_seq=3 ttl=63 time=0.706 ms
64 bytes from 192.168.3.10: icmp_seq=4 ttl=63 time=0.738 ms
64 bytes from 192.168.3.10: icmp_seq=5 ttl=63 time=0.707 ms
--- 192.168.3.10 ping statistics ---
5 packets transmitted, 5 received, 0% loss, time 4031ms
rtt min/avg/max/mdev = 0.706/1.106/2.498/0.698 ms
<< Press any key to return to previous menu. >>
NOTE
If the Network Interface is not configured properly, the following screen is displayed.
PING 192.168.3.10 (192.168.3.10) from 192.168.1.210 : 56(84) bytes of data.
ping: sendmsg: Interrupted system call
--- 192.168.3.10 ping statistics ---
9 packets transmitted, 0 received, 100% loss, time 9038ms
<< Press any key to return to previous menu. >>
6 To return to the main menu, press 7. The following screen is displayed.
Your choice: 7
Going back to the MAIN menu...
7 Configure the FTP Settings.
To configure the FTP settings:
a In the Rescue mode, press 4 to configure the FTP Settings. The following screen is displayed:
FTP MENU
--------------
1) Enter FTP Settings
2) Change ftp server ip address
3) Change ftp port
4) Change user name
5) Change password
6) Change ftp directory
7) Change file name
8) Display current FTP Settings
9) Display Backup Images
Summit WM Maintenance Guide, Software Version 5.3
21