Extreme Networks Summit WM Maintenance Manual page 76

Using the Console Port
If you want to change the default destination (C:\Silabs\MU), you can do so by clicking on the
Browse button and navigating to the destination, where you want to save the driver.
d Click Next. The Ready to Install the program window opens.
e Click Install. The wizard copies the driver to your hard drive, and the Finish window opens.
f Select Launch the CP210x VCP Driver Installer checkbox, and then click Finish. The Driver
Installer opens.
g Click Install. The System Settings Change window opens.
76
Summit WM Maintenance Guide, Software Version 5.3