Extreme Networks Summit WM Maintenance Manual page 31

The following image is the graphical representation of the sequential steps for migrating the
configuration from a platform, running the V4R1 GP7 release, to another, running the V5R3 release.
Figure 2: Graphical representation of the sequential steps for migrating the configuration
To migrate the platform configuration:
1 Log on the Controller from which you want to migrate the configuration.
2 Export the controller configuration to a file by running the following CLI command.
NOTE
The string in the following example depicts the WM100 Controller.
SWM.extreme.com# export configuration
Filename (SWM.WM100.Extreme.13062007.132046):
Comment: <enter a comment here - optional>
Please wait...
Creating SWM.WM100.Extreme.13062007.132046...
Backup/Export complete.
3 Use the show backup command to list the current set of backup files.
4 Copy the file to an external FTP server by running the copy backup command.
NOTE
The string in the following example depicts WM100 Controller.
SWM.WM100.Extreme# copy backup <server name or IP address> <username> <destination
directory> <filename>
5 Type the password.
Summit WM Maintenance Guide, Software Version 5.3
31