Extreme Networks Summit WM Maintenance Manual page 22

Backing up the existing image
10) Download Image from FTP server
11) Upload Image onto the FTP server
12) Return to the main menu
Your choice:
NOTE
When uploading the backup image, the file name corresponds to the image that is being uploaded (filenames
can be displayed by entering 9 in the FTP menu). When downloading a backup image, the filename corresponds
to a file that is being downloaded from the FTP server. Extension determines which backup file (default or user
created) is replaced with the new file from the FTP server.
8 Enter the FTP settings.
a In the FTP menu, press 1. The following screen is displayed.
Your choice: 1
Command syntax: ftp://<user>:<password>@<ftp_ip>:<port>/<directory&file>
~port information is optional: the default value is 21~
Please enter ftp info:
ftp://tester:123456@192.168.10.10:21//backup_dir/gps-V4R2-rescue-user.tgz
9 Check the FTP settings.
To check the FTP settings:
a In the FTP menu, press 8. The following screen is displayed.
Your choice: 8
Current Settings:
-----------------
ftp ip address:
user name:
password:
ftp directory:
ftp file:
Press Enter to continue
10 Modify the FTP settings.
To modify the FTP settings:
a In the FTP menu, choose options from 2 to 7 to individually set/change the FTP settings:
FTP server's IP address
■
FTP port
■
User name
■
Password
■
FTP directory
■
File Name
■
11 Upload the image on the FTP server:
To upload the FTP Server:
a In the FTP menu, press 11. The following screen is displayed:
Your choice: 11
Attempting to upload an image to the ftp server.
Please verify at the ftp server that image has successfully been uploaded
<< Press any key to return to previous menu. >>
22
192.168.10.10 port: 21
tester
123456
"backup_dir"
"gps-V4R2-rescue-user.tgz"
Please be patient
Summit WM Maintenance Guide, Software Version 5.3