Using The Console Port In The Summit Wm100/1000 Controller - Extreme Networks Summit WM Maintenance Manual

Using the Console Port
The Summit WM20 Controller is ready to be booted into the Rescue mode.
The following illustration shows the cable connection between a laptop and the Summit WM20
Controller.
Figure 6: Connection between the Summit WM20 Controller and laptop
USB Control
USB B Male
USB A Male
USB Port
Using the Console Port in the Summit WM100/1000
Controller
The cable connection between the Summit WM1000 Controller and laptop to access the Rescue mode is
same as described in "Using the Console Port in the Summit WM200/2000 Controller" on page 73.
78
Summit WM Maintenance Guide, Software Version 5.3