Working With A Cf Card - Extreme Networks Summit WM Maintenance Manual

For Summit WM Controller images change to: /var/controller/upgrade
●
For OS archives change to: /var/controller/osupgrade
●
3 Upload the image file using the SFTP client upload feature.
4 To complete a Summit WM Controller upgrade or an AP upgrade go to the appropriate Software
Maintenance page. For more information, see
the Summit WM20/200/2000 Controller via the GUI" on page 39
V5R3 to V5R3 GP on the Summit WM100/1000 Controller via the GUI" on page

Working with a CF card

The Summit WM200/2000 Controller supports the use of a CF card to store your system's image and
captured exception traffic files.
NOTE
To use the CF card capabilities of the Summit WM200/2000 Controller, you must remove the cover of the CF card
slot from the Summit WM Controller and then insert a CF card. A CF card is not shipped with your Summit WM200/
2000 Controller. For more information, see the Summit WM200/2000 Controller Installation Instructions.
When working with a CF card, use the Summit WM GUI to:
Mount the CF card – By mounting the CF card, you make the CF card that has been inserted into
●
the Summit WM200/2000 Controller available for use.
Unmount the CF card – By unmounting the CF card, you make the CF card that has been inserted
●
into the Summit WM200/2000 Controller unavailable for use.
CAUTION
You must always unmount the CF card via the Summit WM GUI before removing it from the Summit WM
Controller. Failure to do so may corrupt the files on the flash card. Always wear an ESD wristband when inserting
or removing a CF card.
Delete files stored on the CF card – By deleting files stored on the CF card, you make additional
●
space on the CF card available.
Summit WM Maintenance Guide, Software Version 5.3
"Upgrading the software from V5R3 to V5R3 GPx on
and "Upgrading the software from
46.
55