Extreme Networks Summit WM Maintenance Manual page 16

Version 5.3
Hide thumbs Also See for Summit WM:
Table of Contents

Advertisement

Backing up the existing image
NOTE
If the Network Interface is not configured properly, the following screen is displayed.
PING 192.168.3.10 (192.168.3.10) from 192.168.1.210 : 56(84) bytes of data.
ping: sendmsg: Interrupted system call
--- 192.168.3.10 ping statistics ---
9 packets transmitted, 0 received, 100% loss, time 9038ms
<< Press any key to return to previous menu. >>
5 To return to the main menu, press 7. The following screen is displayed.
Your choice: 7
Going back to the MAIN menu...
6 Configure the FTP settings.
a In the Rescue mode, press 4 to configure the FTP settings. The following screen is displayed:
FTP MENU
--------------
1) Enter FTP Settings
2) Change ftp server ip address
3) Change ftp port
4) Change user name
5) Change password
6) Change ftp directory
7) Change file name
8) Display current FTP Settings
9) Display Backup Images
10) Download Image from FTP server
11) Upload Image onto the FTP server
12) Return to the main menu
Your choice:
NOTE
When uploading the backup image, the file name corresponds to the image that is being uploaded (filenames
can be displayed by entering 9 in the FTP menu). When downloading a backup image, the filename corresponds
to a file that is being downloaded from the FTP server.
NOTE
The file that is downloaded from the FTP Server must have either –user-rescue.tgz, or –rescue.tgz extension. If
the file does not have a proper extension, the download will not proceed. Extension determines which backup file
(default or user created) is replaced with the new file from the FTP server.
7 Configure the FTP settings.
a In the FTP menu, press 1. The following screen is displayed.
Your choice: 1
Command syntax: ftp://<user>:<password>@<ftp_ip>:<port>/<directory&file>
~port information is optional: the default value is 21~
Please enter ftp info:
ftp://tester:123456@192.168.10.10:21/backup_dir/gss-V4R0.0.50-rescue-user.tgz
8 Check the FTP settings.
To check the FTP settings:
16
Summit WM Maintenance Guide, Software Version 5.3

Advertisement

Table of Contents
loading

Table of Contents