Setting The Sleep Timer - ProScan PS20112 Owner's Manual

:;_:s:elto,p,i,_Men,u:, ,Basic Functions continued_,
Setting the Sleep Timer
"With the Sleep Timer, you can program your TV to turn
_itselfoff after a period of up to four hours. This is useful
when you want to watch TV for an hour or so before going
_:osleep.
Setting Sleep ]imer
with or without remote
'1 Repeatedly press the MENUbutton to select SETUPMENUand
then press + to display the setup functions.
The Sleep Timer will begin to count down to zero. The word
SLEEPwill appear on the screen whenever you change
channels or press the -rv button to let you know the Sleep
Timer is activated.
'_,_,;"
Sleep" ">
The SLEEPTIMERshould be selected. If not, repeatedly press
the MENUbutton to select it.
Press the + or- button to select the length of time (up to four
hours) you want the TV to stay on. Each press of the button
increases the time 30 minutes (up to four hours). Then the
time display will start over with 0:00.
The amount of time remaining before the TV shuts itself off
will appear in the
SLEEP
TIMERmenu whenever you press the
MENUbutton to select the SETUP MENUand then press +.
• " *,,_ . , 'o,. " .
_ _l-- lhourand
28 minutes
C_anLabel
Pa_ntalCtrl:Off remaining
When the Sleep Timer counts down to 0:00, the
SLEEP
TIMER
display will appear on the screen for a few seconds. Then the
TV will turn itself off. If you want the TV to stay on when
this display appears, press the TVbutton on the universal
remote. The Sleep Timer will be cancelled. To add more
time to the Sleep Timer whet this display appears, press the +
button on either remote.
1 hourand
30nlinutes
Clearing Sleep ]imer
To cancel the sleep timer, enler the Sleep Timer function and
then press the + or - button until the screen shows 0:00.
The display will automatically disappear from the screen in a
few seconds. It will disappear more quickly if the DISPLAY or
CLEARbutton is pressed.
14