Menu Button - ProScan PS20112 Owner's Manual

OperatingRemote Control
Before attempting to operate the remote control, install its
batteries as shown below.
Installing]ReplacingBatteries
I Turn remote control face down.
2 Press down on the ridged area of the battery cover and
slide it off.
Effective Rangeof RemoteControls
Aim either remote control at your TV's remote control
sensor. The remote controls produce an invisible (infrared)
beam that travels in a straight line much as the beam of a
flashlight. For this reason, when operating either one of the
remote controls, you must point it directly at the front of the
TV without objects between that can block the infrared light
beam.
A_m remote a t your T V's
remote c ontrol sensor
3 Install four "AAA" batteries as shown.
4 Replace the cover and turn remote over (face up).
Notes: Replace the batteries when the TV fails to respond to the remote
control.
If you programmed your master remote to control other components, you
may have to reprogram the code numbers when you change batteries.
"Fry not to press any buttons while changing batteries.
Never place anything heavy on top of the remote control or lay it upside-
clown. This may accidentally depress the buttons for a long time and
discharge the batteries.
Optional
Simplilied
Remote
Simplified Remote
This optional remote can also be used to operate the basic
functions of your TV. Order form is on page 29.=
BUTTON
Turns TV on and off.
CHANNEL B UTI'ONS
Press
CHANNEL
up to select next higher
channel in memory or press CHANNEL down
to select next lower channel. You can add
and erase channels in memory as desired.
Details are on pages 18-19.
VOLUME BUTI'0NS (ALSO +AND- BUTI'ONS)
Press + to increase volume and press - to
decrease volume.
Also use these buttons after you have
pressed the MENU button to enter or adjust
functions. Details begin on page 8.
MENUBUTTON
Press MENU repeatedly until the menu you
want to display is selected, then press + or-.
Next press MENU repeatedly to select the
function you want to adjust and then press +
or - to adjust the setting. Details begin on
page 8.