ProScan PS20112 Owner's Manual page 7

Set the clock.
1 Repeatedly press the MENU button to select the SETUP
MENU and then press +. Press MENU repeatedly again to
select the CLOCK SETdisplay.
" oe o e •
Press and hold the - button to select the correct hour.
Then press and hold the + button to select the correct
minute.
The correct time will now appear on the screen
whenever you change channels or press the DISPLAY
button.
Note: If power is interrupted for an extended time, you will need
to reset the clock.
8 Review menus.
To see the video
menu, repeatedly
press MENU button to
select VIDEO MENU and
then press +.
Repeatedly press
MENU to select
desired function and
then press + or - to
adjust it. Details are
on page 8.
MENU
©
-- +
©©
To see the setup menu,
repeatedly
press MENUto
select SETUP MENUand
then press +. Repeatedly
press MENU
tO
select
desired function and then
press + or - to adjust it.
Details begin on page 12.
vIdeqM_u, _ ,':_.,,: : "
Sleep Timer 0:00
Set Alarm
Chart Label
Parental Ctrl: Off
Chan Ctrl: Normal
° Autoprogram
ChartMere: Stored
Antenna: A
Cable/Air:Cable
VCR 1 chan: Off
VCR 2 Chan: Off
Cable Chaff: Off
ClockSet -Hr +Min
Label channels if desired.
The labeling feature lets you add names (or labels) to
channels as desired.
To label a channel, repeatedly press MENU to select the
SETUP MENU and then press +. Repeatedly press MENU
to select the CHAN LABEL d isplay, and then press + to
enter the function.
Select the channel number you want to label.
Repeatedly press roE up or down on the remote control
to select the desired character, and then pres_,+ to move
to the next character block. When the first name is
finished, you can select another channel to label.
Details are on page 16. "_
To see the audio menu repeatedly press MENU to select
the AUDIO MENU and then press +. Repeatedly press
MENU to select desired function and then press + or - to
adjust it. Details begin on page 9.
J