Audio Equipment - ProScan PS20112 Owner's Manual

Remote Buttons that Control Audio Equipment
After the AUDIO button is programmed,
the buttons
described below will operate the basic functions of most
_udio equipment. Depending on the age, brand, model,
_nd type of audio equipment, some models may not be
_ble to respond to all the function buttons listed. You will
want to experiment with each button to determine the
exact function for your component.
Remote Buttons That
Control Audio Equipment
OFF/ON: P ress to turn on
component. Press again to
turn off. Some components
will turn on automatically
when you press the AUDIO
button.
Number B uttons: Press two
numbers to directly select a
channel.
ANTENNA: Performs various -
functions depending on the
type of equipment.
Experiment with this button.
PLAY:Press to start
component playing.
REWIND:Press while
component is stopped to
rewind tape.
AUDIO: Press this button to turn on
the audio component and put
remote in "Audio Mode" so other
buttons will control the audio
component. Press the "rvbutton to
put remote back into "TV mode".
CHANNEL: Press to select the next
higher or lower channel in the
component's channel memory.
VOLUME: Press to change volume
level
PAUSE: Press to pause play or
record. To release pause, press
again.
STOP:Press to stop whatever the
component is doing: playing,
recording, rewinding, etc.
RECORD: Press to start recording.
FF(Fast F orward):Press while
component is stopped to fast
forward tape.
26