Setup Menu; Follow Instructions - ProScan PS20112 Owner's Manual

SETUP MENU
•Mt,ae • .
Vi_o ldehti:
Audio Men_ _
_..._,,_,,,
2 Select function
by repeatedly
pressing MENU
to move down
the screen.
MENU
!
Repeatedly
press MENU to
select SETUP MENU and then
press + to display the
functions in the SETUP
MENU,
I I
:;€IP ._,CtrI: Normal
_
Mere: S tored.,
,°
"ClOck Set -HR +MIN
°
°
3 Follow instructions
below for desired function.
The CAPTIONING feature lets you display a program's sound as
words on the TV screen. Four types of closed captioning are
available. Select CAPTIONS 1 for full translation of the primary
language in your area. Select CAPTIONS 2 or secondary language
translation, simplified English, or nothing at all. Both TEXT 1 and
TEXT 2 display on-screen boxes containing general information not
related to closed captioning. Details are on page 19.
To set the SLEEP TIMER,repeatedly press + or - to select the length
of time you want the TV to stay on. To cancel, press + or - to
change the setting to 0:00.
Details are on page 19.
Press + to display the ALARM functions.
Turn ALARM ON and OFFby pressing +.
Enter ON TIME and OFFTIME by pressing - to
set the hour and + to set the minutes. Enter
CHANNEL you want TV to tune by pressing
CHANNEL up or down and then pressing +.
Details are on page 20.
Narr_On
On Time: 6:_0AI_
Off Tmle: 1t .'OOPM
imlmlllZ_m@
To label channels press +. Four blank letter blocks will appear.
Press and hold VOLUMEup or down button on remote until the
letter you want in the first block appears. Then press + to move to
the next block. Repeat until name is complete. Details are on
page 22.
To turn on PARENTAL CTRL,press +. When this function is set to ON,
all channels that have been LOCKED out with the next function called
CHANCTRL will not be viewable. To lock out channels, select the
CHANCTRLfunction. Then press CHANNEL up or down to select the
channel and press + to change the setting from NORMAL to LOCKED.
Details are on page 23.
To start autoprogramming, press +. The TV will automatically
cycle through all channels and place active channels in memory.
Details are on page 24.
To add or erase individual channels from memory, select the channel
with the number buttons and then press + to add or- to erase.
Details are on page 25.
To switch antenna inputs, press + or -. You will probably not use
this function unless you have something connected to both the
ANTENNA A and ANTENNABinputs on the back of the 'IV. Details,_
are on page 21.
To change the CABLE/AIR setting, press +. If you have cable-TV,
this function should be set to CABLE.If you have a home antenna,
this function should be set to AIR.
To set the VCR1 CHANNEL first enter the channel number by
pressing two number buttons on the remote and then press +. The
channel you enter here is the channel to which the TV will
automatically tune when you later press the VCR_button on the
remote. Details are on page 26.
To set the VCR2 CHANNEL first enter the channel number by
pressing two number buttons on the remote and then press +. The
channel you enter here is the channel to which the TV will
automatically tune when you later press the VCR2button on the
remote. Details are on page 26.
To set the CABLE CHANNEL first enter the channel number by
pressing two number buttons on the remote and then press +.
The channel you enter here is the channel to which the TV will
automatically tune when you later press the CABLEbutton on the
remote. Details are on page 27.
To set the clock, press and hold - to set the hour. Then press and
hold + to set the minutes.