ProScan PS20112 Owner's Manual page 25

Changing Antenna Input
Your TV has two separate antenna inputs on the back
(labeled
ANTA and ANT
B)
that allow you to connect two
different
signal
sources if desired. For
example,
you can
connect a cable-TV system to one input and a home
antenna to the other
input.
By pressing
the ANTENNAbutton on the remote
control,
you
can switch back and forth between the two signal sources.
Listed below are some other common uses of the two
antenna inputs:
1 Connecting a cable-TV system (or antenna) to one input and a
VCR to the other.
3
4
Connecting a cable-TV system (or antenna) to one input and a
video game to the other.
Connecting a double-trunk cable system to both inputs.
Connecting a cable-TV converter/decoder box that scrambles
only premium channels and cannot be controlled by remote
control. Connection details are on pages 33-34.
The Channel Memory is the list of channel numbers your
TV will stop on when you press the CHANNEL up or down
buttons. Your TV provides two separate channel memories
(one for ANTA input and one for ANTB input). This allows
you to add or delete channels into each channel memory as
desired.
When you use the AUTOPROGRAM function, the TV
automatically checks both inputs and sets up a separate
channel memory for each.
ChangingAntenna Input
without remote
1 Repeatedly press the
MENU
button to select
SETUP MENU
and
then press + to display the setup functions.
2 Repeatedly press the
MENU
button to select
ANTENNA:
NB.
blue for ANT A
Press the + or- button to change the setting. The screen
display will change from A to e to let you know you are now
watching whatever signal is connected to the ANTB
connector on the back of the TV.
yellow for ANT B
g
_i¸ _
ChangingAntenna Input
with remote
1 Press the
ANTENNA
button on the remote control to switch
from ANT A input to ANT B input. The color of the channel
numbers will change from blue to yellow to let you know you
are now watching whatever signal is connected to the ANTB
conn_tor on the back of the TV.
blue for
ANT
A
yellow for ANT B
Press the + or - button again to switch back to ANTA. The
screen display will change to ANTENNA: A to let you know you
are now watching whatever signal source is connected to the
ANTA connector on the back of the TV.
blue for ANTA
Press the ANTENNA button again to switch back to ANTA. The
color of the channel numbers will change back to blue to let
you know you are now watching whatever signal source is
connected to the ANTA connector.
21