ProScan PS20112 Owner's Manual page 4

rhr0 f:lJ
Audio Menu
Setup Menu ,
2 Select function
by repeatedly
pressing MENUto
move down the
screen,
1 Repeatedly press MENU to
select VIDEO MENU and then
press + to display the
functions in the VIDEO MENU.
2
"_rll
i Contra.4t
Brigm
Sharp"
Picture Reset
Press + to increase
setting or press - to
decrease setting.
The
PICTURE RESET
function will return
video functions to
factory settings.
Adjustingfor a Color Picturethat Pleases You
1 Decrease color to minimum. This will leave a
black-and-white image on the screen.
2 Adjust contrast until the picture pleases you.
3
Adjust brightness until the black parts of the
picture appear black. You may need to wait until
the picture shows something you're sure is black.
Be careful not to lose the details in darkly shaded
areas,
4 Increase color until you reach a pleasing level of
intensity.
5 Adjust tint until flesh tones or othercolor objects
appear natural
6 Adjust sharpness for a pleasing level of picture
sharpness. (For weak signals, the picture may be
more pleasing with sharpness decreased.)
Audio Menu
Mu_. ,:
V{deo Mefiu.
2 Select fur_etio_-
..... ° ......
- bY repeatedly
pressing MENU to
move down the
screen. :i
Repeatedly press MENU tO
select AUDIO MENU and then
press + to display the
functions in the AUDIO MENU.
3 Follow instructions below for desired function.
To adjust TREBLE, BASS, or BALANCE functions, press + to increase or
press - to decrease the setting.
To prepare the 'IV to receive stereo, press + to set function to STEREO.
Your 'IV will automatically reproduce stereo when received.
If you want the TV to automatically expand stereo signals when
received, press + to set the EXPAND STEREO function to ON. The
STEREO/SAP function above must also be set to STEREO.
To turn off TV's speakers, press + to change setting to OFF. You will
iwant to leave the TV's speakers turned ON unless you connect an
, amplifier to tile TV that has its own set of speakers.