Limited Warranty - ProScan PS20112 Owner's Manual

Monitor/receiver
Table of Contents

Advertisement

Can't select certain channel
• Channel may not be in Channel Memory. Try pressing two
number buttons.
• If using a VCR, check to make sure the rV/VCR switch on the
VCR is in the correct position.
• To select cable channels 100 through 128, press number
button 1 until 1-- appears. Then press the other two
number buttons. The CASLE/AIR function must be in eARLE
mode to select channels higher than 69.
Noisy stereo
reception
• May be a weak station.
Use AUDIObutton
to change
STEREO/SAPfunction
tO MONOmode instead of STEREO.
No picture,
no sound
but power light is on
• Maybe
someone
changed
CABLE/AIR function
to wrong
position.
• Maybe a vacant channel is tuned.
• For Channels 90, 91, and 92, make sure the component
connected to those INPUT jacks is turned on in order to see
picture.
• If watching VCR (connected only through antenna input),
make sure TV is tuned to channel 3 or 4 - same as CHa/ca 4
switch on VCR." Also check to make sure TV/VCR switch on
VCR is in correct position.
.t
Sound okay,
picture
poor
• Check
antenna connections.
• Try adjusting
SHARPNESS function tO improve weak signals.
Limited Warranty
What your warranty covers:
* Any defect in material or workmanship.
For how long after your purchase:
• One year for labor charges,
• One year for parts.
• Two years for picture tube.
What
we will do:
• Pay any Authorized
ProScanTelevision
Servicenter
the
labor charges to repair your_television.
• Pay any Authorized
ProSeanTelevision
Servicenter
for
the new or, at our option, rebuilt replacement
parts and
picture tube required to repair your television.
How you get service:
• Request in-home service from any Authorized
ProScan
Television
Servicenter.
Tc identify
your nearest
Authorized
ProScan Television
Servicenter,
ask your
dealer or call 1-800-PRoSCAN.
• Show the service technician your evidence
of purchase
date.
What your warranty does not cover:
• Customer instruction. (Your Owner's Manual clearly
describes how to install, adjust, and operate your
television. Any additional information should be
obtained from your dealer.)
• Installation and related adjt_stments.
• Signal reception problems not caused by your
television.
• Damage from misuse or neglect.
• Remote control batteries.
• A television that has been modified or incorporated into
other products or is used for institutional or other
commercial purposes.
• A television purchased or serviced outside the USA.
Product Registration:
• Please complete and mail the Product Registration
Card packed with your set. It will make it easier to
contact you should it ever be necessary.
The return of
the card is not required for warranty coverage.
How state law relates to this warranty:
• This warranty
gives you specific legal rights, and you
also may have other rights that vary from state to state.
If you purchased your television in Canada:
• The Canadian Warranty applies in place of this
warranty. A separate warranty for Canada is enclosed
with all televisions sold in (_anada.
47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ps27112

Table of Contents