Setting The Alarm - ProScan PS20112 Owner's Manual

Setting the Alarm
13ysetting the alarm, you can program the TV to turn on
and/or off by itself. After the ONTIME is set and the ALARM
ON/OFF function is set to ON,the TV will automatically turn
on each day at the time you selected and remain on until
the OFF TIMEis reached. If no OFF TIMEhas been
programmed, the TV will remain on until you turn it off.
'_.'_l ir lill LlPJI
The ALARM
ON/OFF
function lets you easily deactivate or
reactivate the alarm without having to reset the ONTIME and
OFF TIME.
When the alarm time is reached, the set will turn on at
whatever volume you left it when you last turned it off. So
if you want the TV to come on loudly at the ONTIME,be
sure the TV is playing loudly when you turn off the TV for
lhe last time.
"Whenthe ALARM
ON/OFF
function displays SETCLOCK_ yOU
will need to set the clock time before you will be able to
turn on the alarm function. Details for setting the clock are
on page 3.
Note: During extended power failures the alarm function will be
disabled. The alarm ON TIME and OFF
TIME
will stay set but the
ALARM
ON/OFF function will reset to OFF and will display SET CLOCKto inform
you that the clock must be reset to the correct time. Once the clock has
been reset, you can reactivate the ALARMfunction by changing the ALARM
JFunction to ON.
Setting the Alarm
1 Repeatedly press the
MENU
button to select SETUPMENUand
then press + to display the setup functions.
3 When the first
ALARM
functioa
is selected, pressing + or- will
switch the setting between ON
and OFF. Set this function to
ON
if you want to activate the
alarm. When this function is
On Time: Disabled
Off Tim_ Disabled
Channel: 12
set to OFF, the alarm is deactivated and the TV will not turn on
or off by itself.
Note: If SETCLOCK is displayed next to ALARM, you will need to set
the clock time before you will bc able to turn on the alarm function.
Details for setting the clock are on page 3.
Press MENUto select the next ".'t_'_PNs: ...... :'"" _a"
function called ON
TIME.
If you
want the TV to turn on by itself,
enter the desired time by
pressing - to select the hour
(including AM and PM) and
:Off-TIr_¢Disabl_d. "
Channel;32
then pressing + to select the minutes. If you only want the
TV to turn off by itself and nat turn on, you can disable the
ON TIME
by
pressing -
until the
word DISABLED
appears.
Note: Remember to check the AM/PM setting. Midnight is
12:00 AM and noon is 12:00 Plvl.
Press MENUto select the next I_IpM
function called OFFTIME. If _OU
12
want the TV to turn off by itself,
enter the desired time by
pressing - to select the hour
(including AM and PM) and
||ilILUT'_ nil llltl'dtl • lll!i|!*!!=imlolU_,
then pressing + to select the minutes. If you only want the TV
to turn on by itself and not turn off, you can disable the o_:
TIME
by pressing - until the word
DISABLED
appears.
Repeatedly press the MENUbutton to select the SETALARM
function. Then press + or - to display the alarm settings.
6
Press MENUto select the next
function called CHANNEL This
function lets you program which
channel the TV will tune when _Z_._,_ _:'.._o
it turns on at the ON TIME. Press
._Of_'l_ffl_'$_lOOlaM_'_ :.....
,IO_ Iglll lit.1 Mll _
CHANNEL
up or down to select ".', _'" '. _'. .... ' _'_"o " _ '
the channel, and then press + or - to enter it into the
CHANNEL
function.
Note: The TV will change to the channel that you select. This will
help you to confirm that it is indeed the channel you want the TV to
turn on to.
15