Specifications - ProScan PS20112 Owner's Manual

Design Specifications Cleaning and Care
General Specifications
Color Standard:
Chassis:
Power Requirements:
Power Consumption:
Remote Control
Model:
Transmission system:
Batteries:
Battery Life:
Power Cord
RF Specifications
Tuning System Type:
Band Coverage:
Frequency Coverage:
Tuner Type:
Channel Access:
Channel Indication:
Antenna Inputs:
Sensitivity:
Video Specifications
Horizontal Luminance
Resolution:
Black to White Rise Time
Luminance Bandwidth:
Video Input:
Video Output:
HV t_ Zero Beam current
525 line NTSC Color
CTC169, solid state, unitized
120VAC + 10%, 60Hz
90W average, 140W maximum
CRK62F
Digitally encoded infrared light
CRK62F: 4 AAA Size
One Year in Normal Use
Type SJT 2
Quartz-controlled
Multiband Frequency Synthesis
VHF channels 2-6, 7-13
UHF Channels 14-69
EIA Cable Channels 1-125
Complete chart is on page 36.
54-806 MHz
Solid State
Programmable Scan Up/Down
Direct Access With Remote
On-Screen
Two 75-ohm VHFAJHF inputs combined
151.tV,VHF 30gV, UHF
up to 560 Lines (from S-VIDEO
input) using wideband video source
75ns
7.0 MHz (from S-VIDEO input)
1Vp-p; 75 ohms; negative sync
1Vp-p; 75 ohms; negative sync
27.5kV Nominal
Audio Specifications
Frequency Response:
Stereo System:
Stereo/Mono Switching:
Expanded Stereo:
Audio Input:
Audio Input
Impedance_
Audio Power:
Audio Output
Selected Outputs:
Outputs To Hi-Fi:
Output Impedance:
Speaker Type:
Speaker Impedance:
50-20,000 Hz (at rated output)
MTS Stereo with SAP (Second
Audio Program)
Automatic
Switchable
450 mV RMS typical, 1 V RMS
maximum
Greater than 50 kOhms (Stereo);
Greater than 25 kOhms (Mono)
5 watts/channel RMS into 8 ohms
with less than 1% THD
Output level tracks inputs within +l/-2dB
2 V RMS maximum, controlled by
volume, mute, bass, treble, and balance
Surround and Hi-Fi outputs less
than 2,500 ohms
Two 21/2' x 5" High Compliance
Speakers
Internal, 8 ohms (nominal)
External, 8 ohms
The ProScan NoGlare
TM
picture tube has a special lithium
silicate faceplate that virtually eliminates glare. It also
includes an anti-static coating to prevent dust buildup, so
the screen will require much less dusting than conventional
TV screens.
You can clean the TV as required, using a soft cloth or the
dusting attachment for your vacuum cleaner. Be sure to
occasionally vacuum the ventilation slots in the cabinet to
help assure adequate ventilation.
To clean the faceplate (screen) of the picture tube, use a
nonabrasive glass cleaner like Windex brand or Glass Plus
brand, with a soft cloth. Oily foods like peanut butter can
be effectively cleaned from the faceplate with glass
cleaners.
Do not use furniture polish on the TV cabinet or faceplate
of the picture tube. Because textured finishes are porous,
using furniture polish could mar their appearance. They
can be easily cleaned with z damp, soft cloth. Furniture
polish is probably the most difficult material to clean off a
picture tube under normal c3nditions. To remove furniture
polish from the TV screen, _Jse 100% isopropyl alcohol (a
component in most glass cleaners) with a soft cloth.
While cleaning, do not allow liquid to run down the screen
and inside the instrument. Also avoid placing drinks or
vases with water on top of ) our TV.
When turning the set on after cleaning the faceplate, there
may be some rainbow effec:s if the screen is not
completely dry.
All features and specifications are subject to change without notice.