Setting The Sleep Timer - ProScan PS27123 Owner's Manual

Setting the Sleep Timer
With the Sleep Timer, you can program your TV to turn
itself off after a period of up to four hours. This is useful
when you want to watch TV for a selected length of time
before going to sleep.
Setting Sleep Timer
with or without remote
1 Repeatedly press the MENUbutton to select
SETUP
MENUand
then press + to display the setup functions.
The Sleep Timer will begin to count down to zero. The word
SLEEPwill appear on the screen whenever you change
channels or press the TVbutton to let you know the Sleep
Timer is activated.
10:.41PM 12
Sleep
Mute
Video Menu
Audio Menu
Rm'_|lle]lkftlgllll
The SLEEP TIMERshould be selected. If not, repeatedly press
the MENUbutton to select it.
off
Parental Ctd: Off
Press the + or - button to select the length of time (up to four
hours) you want the TV to stay on. Each press of the button
increases the time 30 minutes (up to four hours). Then the
time display will start over with 0:00.
Parental_d: Off
1 hourand .
30 minutes
The amount of time remaining before the TV shuts itself off
will appear in the SLEEPTIMERmenu whenever you press the
MENU
button to select the SETUPMENUand then press +.
Parental 51: Off'
_'<l --" "1 hourand
• 28 minutes
remaining
6 When the Sleep Timer counts down to 0:00, the
SLEEP TIMER
display will appear on the Screen fora few seconds. Then the
TV will turn itself off. If you want the TV to stay on when
this .display appears, press the TVbutton on the universal
remote. The Sleep Timer
wiil
be cancelled. To add more
time io the Sleep Timer when this display appears, press the +
button.
Clearing Sleep Timer
To Cancel the sleep timeL enter the Sleep Timer function and
then press the + or - button until the',screen shows 0:00.
_o
€1
The display will.automatically disappear from the screen in a
few seconds.
It will disappear more quickly if the DISPLAY or
CLEARbutton is pressed.
17