ProScan PS20112 Owner's Manual page 26

;setup Menu_:io;_lZa!_iilC_,!F.u_qlctions, continued
Cable Box Channel Setup
The CABLE C HAN function lets you program to which channel
the TV will automatically tune when you press the CABLE
button on the remote. This is handy if you have to connect
a cable box to your TV. You will no longer have to
remember the output channel of the cable box because the
TV will remember for you.
For example, if you connect a cable box to the TV's
CABLE/ANTENNA
connector (as shown on page 33), you will
no longer have to remember to select channel 2, 3, or 4 on
the TV to see what's coming from the cable box. By
entering the cable box's output channel (usually 02, 03, or
04) next to the CABLE CHAN function, the TV will
automatically tune to that channel each time you press the
CABLE button on the remote.
This function is especially convenient if you have a
remote-controllable cable box that can be operated by the
CABLE button on the remote as described on page 35.
Pressing the CABLE button will then not only switch the
remote to cable mode but will also automatically tune the
TV to the proper channel for viewing the picture from the
cable box.
Setting Up Cable Box Channel
with or without remote
1 Repeatedly press the MENU button to select
SETUP MENU
and
then press + to display the _,etupfunctions.
Mute , v_,
Audio ._Mequ_
I[,,"P:liplI__t_m
2 Repeatedly press MENUto select the
CABLE
CHANfunction.
a_TPM: ,-la
VCR 1 _;_
VGR2 01_,'_2"o,
I[e_,-IF.ieJlm =iwE
Enter the channel number you want to program by pressing
two digit buttons on the reraote control. (The channel
number you enter is the channel to which the TV will tune
automatically when you later press the CABLE button on the
remote). The TV will change to the channel you select. Thi:
will help you to confirm that it is indeed the channel you
want the TV to automatically tune. Most cable boxes output
their signals on either channel 02, 03, or 04.
vOS1Char _ ;
VCR
2vCha_'t_;92 '.':
....
I,J_-I_F., litton| tqPli
Press the + button to program the channel number you
selected into the CABLE
CHhN
function memory.
.. ,_. , 03
Note: Pressing the - button hzre will turn off this feature and
display CABLECHAN: OFF agai a.
22