Volume Buttons; Channel B Uttons - ProScan PS20112 Owner's Manual

TIMEANDCHANNEL N UMBER DISPLAYS s how the current time
(once set) and channel number whenever you turn on the TV,
change channels, or press the remote's OZSPLA¥ button. These
dtisplays also appear whenever you change volume with the
',,OLUME b uttons on the front of the TV.
REMOTE CONTROL SENSOR receives commands from the remote
control. When using the remote control, point it toward this
sensor.
//POWER
INDICATORlights whenever
the TV is turned on.
VOLUME BUTTONS
Press VOLUME up to increase volume, or press VOLUME down to
decrease volume. The volume display will automatically
appear on the screen when you press the VOLUME b uttons.
/
/
/
STEREO HEADPHONE JACKlets you connect an optional
headphone to enjoy private listening without disturbing
others. If the plug on your headphones does not fit this jack,
a,iapters are available from your local electronics supply
slore.
Plugging in headphones will not automatically mute the sound
fiom the TV. This special feature enables someone with a
hearing impairment to attach a set of headphones with
separate volume control and enjoy a program with others in
the same room listening at a lower volume. You can also
enjoy private listening if desired. Here's how to completely
mute the sound except for what's coming through the
headphones.
1 Change the SPEAKEFtS: ON/OFF function to the OFFsetting as
described on page 9.
2 If an optional amplifier is connected to the TV, turn off the
amplifier to prevent sound from coming through it.
-- POWER BU'I-f0N
Press once to turn on TV. Press again to turn off TV.
CHANNEL B UTTONS
Press CHANNEL up to see the next higher channel in memory,
or press CHANNEL down to see the next lower channel in
memory. Your TV will automatically program channels into
the channel memory for you when you start the AUTOPROGFtAM
feature described on page 18. You can also add or erase
individual channels as desired as described on paje 19.
MENUBU'FrON
Press MENU repeatedly until the menu you want to display is
selected, then press + or -. Next press MENU repeatedly to
select the function you want to adjust and then press + or - to
adjust the setting. Details about using each function begin on
page 8.
-- - AND + BUTTONS
Use these buttons after you have pressed
the MENUbutton
to
enter or adjust functions.