ProScan PS20112 Owner's Manual page 28

To program the remote to control another brand of VCR,
just press veal (or VCR2), t hen ID,then the two-digit code
,number for your brand of VCR. Depending on the age,
brand, model, and type of VCR, some models may not be
able to respond to the remote control.
4 PRESSOFFJON
ANDTHEN VCR1
(ORVCR2ITO
TEST.
3 PRESSTWO
NUMBER
BUT[ONS.
1 PRESSVCR1
(ORVCR2).
-- 2 PRESSID.
Programming Remote To Control Other Brands of VCRs
Refer to the chart at the right to find the code number that
corresponds to the brand name of your VCR. Keep this
number in mind. If more than one number is listed, you
may need to try each one separately until you find the one
that works.
1 Press vcm or yen2 button on remote (depending on which
button you want to program for that VCR). You can
program each button to control a different VCR.
2 Press io button on remote.
Press two number buttons (first one, then the other) to
enter the code number for your brand of VCR. You must
press the two number buttons within three seconds of
pressing it).
Point the remote at the VCR and press the OFF/ONbutton to
test the code number. If nothing happens, try pressing VCR1
or VCR2(whichever button you are programming). If the
right number was entered, the VCR should turn on. If the
VCR does not react to the remote, repeat steps 1 thru 4
with ar_other code number.
Note: Some older VCRs do not have an OFF/ONswitch on their
remote controls and cannot be turned on and off remotely. If you
have this type of VCR, you can test the code number by pressing the
CHANNEL button instead of the OFF/ONbutton. Make sure the VCR is
already turned on when you test the code number.
Operating Notes: After the remote is programmed, it will turn on the
VCR whenever you press VCRI(or VCR2)and then OFF/ON. Some VCRs
turn on automatically when you press VCR1or VCR2. You'll be able to
control the VCR whenever the remote is in the "VCR mode". To put the
remote in the "VCR mode", press the VCRI or VCR2button (depending on
which button you programmed). The other VCR buttons (such as PLAY,
PAUSE, STOP, REWIND, F F, and
RECORD)
will control the VCR when the
remote is in the "VCR mode". To turn off the VCR, press VeR* (or
VCR2), then OFF/ON. To change channels on the VCR, press VCR1(or
VCR2), then CHANNEL up or down. This remote will control the basic
functions of compatible VCRs. It will not be able to control the
advanced functions of all brands of VCRs. You may have to reprogram
your remote if you change its batteries.
Notes About Controlling Two VCRs
This remote can control two VCRs independently as long as each VCR
operates on a different remote transmitting code.
24
:VCR B rand_ : Code(s)
AIWA 15
Akai 03, 22, 23
Audio Dynamics 14, 16
Brooksonic l0
Canon 08
Capehart 01
Citizen 09
Craig 12
Curtis Mathes 00, 08, 15
DBX 14, 16
Dimensia 00
Emerson 10, 20, 34
Fisher 12, 18, 19
Funai 15
GE 00, 07, 08, 32
Goldstar 09
Hitachi 05, 35, 36
Instant Replay 08
JCPenney 02, 05, 08, 14, 16, 30
JVC 02, 14, 16, 30
Kenwood 02, 14, 16, 30
Magnavox
Marantz 02, 14, 16, 29, 30
Marta 09
Memorex 08, 12
MGA 04, 27
Minolta 05
Mitsubishi 04, 27
Montgomery Ward 06
Multitech 07, 15, 32
NEC 02, 14, 16, 30
Panasonic 08
Pentax 05
Philco 08, 29
Philips 08, 29
Pioneer 05
ProScan 00
Quasar 08
RCA 00, 05, 07, 28, 35, 37
Realistic 02, 06, 08, 12, 15
Samsung 07, 32
Sanyo 02, 12
Scott 04, 13
Sears 02, 05, 18, 19
Sharp 06, 24
Shintom 31
Sony 17, 26, 38
Sylvania 08, 15, 29
Symphonic 15
Tashiko 09
Tatung 30
Teac 15, 30
Technics 08
Teknika 21
Toshiba 05, 13
Vector Research 14, 16
Video Concepts 14, 16
Wards 06, 25
Yamaha 02, 14, 16, 30
Zenith 11, 17
Note: Refer to the information sheet packed with your remote control
for the latest list of brand names and code numbers. Because this list is
constantly growing, the information sheet packed with your remote
control may be a later version of this list and contain additional brands
and!or code numbers.