ProScan PS20112 Owner's Manual page 43

Monitor/receiver
Table of Contents

Advertisement

Special
Recording onto VCR
This connection
only allows you to record on the VCR
whatever is currently being displayed on the TV screen
except for menus and status displays. This is not a
common
application for recording with your VCR, but you
may find it useful in certain situations. You'll also be able
to record signals from another VCR (or similar device) that
is connected
to the TV's INPUT 1 or INPUT 2 jacks.
The TV must remain turned on during recording.
If you
change channels on the TV, the channel change will be
recorded on the VCR tape unless you pause the VCR
during recording.
Because your TV is cable-compatible,
this application
may be used to record cable-TV programs from the TV
onto a VCR that is not cable-compatible.
You may also want to use this connection to dub or edit
VCR tapes with two or three VCRs. By connecting one
VCR (or camcorder) to the INPUT 1jacks and another VCR
(or camcorder)
to the INPUT 2 jacks, you'll be able to
selectively
edit and record whatever is playing on the TV
screen onto a third VCR (or camcorder) connected
as
shown here to the SELECT OUT jacks.
If you connect a surveillance
system to your monitor,
you'll be able to record what the camcorder is displaying
on the TV screen by connecting a VCR (or camcorder)
to
the SELECT OUT jacks as shown here. To see the signal from
a device connected
to the ZNPUT 1 jacks, select channel 91.
Select channel 92 to see the signal from a device connected
to the INPUT 2jacks.
To see the signal from a device connected to the INPUT 1
jacks, select channel 91. Select channel 92 to see the signal
from a device connected
to the INPUT 2jacks.
Note:
Signals from the S-VIDEO connector
do not come through the
SELECT OUTjacks.
To record from an S-VHS component,
remember
to
also connect the regular video cable to the V(DEO INPUT1jack and then
tune to channel 91.
Menus (video, audio, setup) and displays like clock and channel,
and the
inset picture in picture-in-picture
co not come through the SELECTOUT
jacks.
Back of VCR
VIDEOIN
I'-- AUDIO IN 7
_ll_lll_
- Audio/Video Cables"
(suchas AH077G)
HI-FI OUT
SELECTOUT
@
INPUT 1t
(_
L
CABLE/ANTENNA
ANT _,
t
J!
ANT B
S-VIDEO •
CONVEFITER
VIDEO
INPUT
r--1
@
1
SELECT
tOUT
¢p
==
r_
Caution:
The unauthorized
recording of television programs and other matertals may
infringe the rights of others.
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ps27112

Table of Contents