Fisher & Paykel Aerotech OB30 Series User Manual page 37

User preference settings
How to chart
Your oven is preset to use Fisher & Paykers AERO terminology. This is listed in the languages as
LANG USA. However, you may choose to use an alternative, CONV terminology. This is listed in
the other languages as LANG DCS. To select it, refer to the instructions on how to change the
language below. Note that once you have changed terminologies, all references to AERO in the
user guide should be understood as being equivalent to CONV.
1 Enter the USER SELECT function and turn the function knob clockwise until LANG USA appears in
its display.
2 Press PUSH TO fh to toggle through the different languages: LANG USA for AERO terminology,
CLEAR
LANG DCS for CONV terminoJogy, LANG UK ENG for UK EngJish, LANGUE FRANCE for Canadian
French or LANG ESPANO for American Spanish.
3 Press the CLOCK button to activate.
4 Turn the function knob back to OFF.
How to reset the oven
This will reset the TEMP (temperature) SCALE, SHORT ALERT, TIME MODE and SHOW CLOCK to
their default settings. SABBATH mode and language settings will remain unaffected.
1 Enter the USER SELECT function and turn the function knob clockwise until RESETappears in its
display.
2 Press PUSH TO f'_ to reset the oven to default settings.
CLEAR "
3 Press the CLOCK button to exit USER SELECT function.
4 Turn the function knob back to OFF.
How to lock the control panel
Locking the control panel disables all the buttons and knobs, which can be useful when cleaning
oven surfaces or preventing accidental bumps and unauthorized use. The control panel can only
be locked when the function and temperature are both OFR
To lock the control panel
Press the PUSH TO _ button and hold down for five seconds. The LOCK symbol will appear in
CLEAR
the clock display. Repeat to unlock.