Emulation Mode; Emulation Mode Selection; Kpdl (Auto) Alternative Emulation Selection - Kyocera KM-2540 Operation Manual

Selecting the Printer Settings

Emulation Mode

This section explains the procedure to select the emulation protocol.
NOTE:

Emulation Mode Selection

Emulation modes that can be used with this machine: PCL6, KPDL, KPDL(AUTO), KC-GL,
Line Printer, IBM Proprinter, Diabro 630, and EPSON LQ-850
1 Press the [Print] key. The machine enters the printer mode.
2
Press [Printer Menu].
3
Press [Emulation].
4
Select the desired interface tab.
5
Select the desired emulation mode.
IMPORTANT: If you set KPDL(AUTO), switching between KPDL and an alternative
emulation mode will be automatically performed according to the print data. If you set KPDL
or KPDL(AUTO), the details of any error that occurs during printing can be printed. If you
set KC-GL, you can set the thickness of the pen and page size.
6
On completion, Press [Close] and returns to the Printer menu screen.

KPDL (AUTO) Alternative Emulation Selection

If you set KPDL(AUTO), switching between KPDL and an alternative emulation mode will
be automatically performed according to print data.
Available emulation modes: PCL6, KC-GL, Line Printer, IBM Proprinter, Diabro 630, and
EPSON LQ-850
2-10
You can set the emulation for each interface.
Select item.
Printer menu
Print Sta- Paper
Font
tus Page Handling
Interface Page Set
Print RAM DISK
Emulation
Quality Mode
Emulation
Line
PCL6
Printer
IBM
KPDL
Proprinter
KPDL
Diablo 630
(AUTO)
EPSON
KC-GL
LQ-850
Network USB
Printer menu
Others