Emulation mode
This section explains the procedure to select the emulation protocol.
Note
You can set the emulation for each interface.
Emulation mode Selection
Emulation modes that can be used with this machine: PCL6, KC-GL, KDPL, KDPL (AUTO), Line
Printer, IBM Proprinter, Diablo 630, and EPSON LQ-850
1
Press the [Printer] key. The machine enters the printer mode.
2
Press [Printer Menu].
3
Press [Emulation].
4
Select the desired interface tab.
5
Select the desired emulation mode.
Important!
•
•
•
6
On completion, Press [Close] and returns to the Printer menu screen.
KPDL (AUTO) Alternative Emulation Selection
If you set KPDL(AUTO), switching between KPDL and an alternative emulation mode will be
automatically performed according to print data.
Available emulation modes: PCL6, KC-GL, Line Printer, IBM Proprinter, DIABLO 630, and EPSON
LQ-850
1
Access Emulation, refer to Emulation mode Selection on page 2-11.
2
Press [KPDL(AUTO)].
If you set KPDL(AUTO), switching between KPDL and an alternative emulation mode will be
automatically performed according to the print data.
If you set KPDL or KPDL(AUTO), the details of any error that occurs during printing can be
printed.
If you set KC-GL, you can set the thickness of the pen and page size.
Selecting the Printer Settings
Select item.
Printer menu
Print Sta-
Font
tus Page
Interface
Page Set
Print
Emulation
Quality
Emulation
Line
PCL6
Printer
IBM
KPDL
Proprinter
KPDL
Diablo 630
(AUTO)
EPSON
KC-GL
LQ-850
Parallel
Network
Printer menu
Paper
Hard Disk
Handling
USB
2-11
Other