Operating; Switching On - Switching Off - Safe Stop; Switching On; Switching Off - Duerkopp Adler 910 Operating Instructions Manual

7.

Operating

7.1

Switching on - Switching off - Safe stop

7.1.1

Switching on

7.1.2

Switching off

7.1.3

Safe stop

1
–
Switch on the main switch 1.
–
Step the pedal back to reach the initial position of the sewing unit.
The main menu appears in the display.
–
Switch off the main switch 1.
All drives and the control are immediately separated from the
mains.
The sewing unit has to be switched off or switched to "safe stop" before
carrying out any work on it.
Switching on "safe stop"
–
Press key 2.
The key must snap in!
The sewing unit is in "safe stop" condition.
The lamp in the key is shining.
Switching off "safe stop"
–
Press key 2 again.
The key must be released.
–
Step the pedal back to reach the initial position of the sewing unit.
2
1
9