Changing The Needle - Duerkopp Adler 910 Operating Instructions Manual

7.7

Changing the needle

2 1
Caution: Danger of injury !
Switch the main switch off.
Change the needle only with the sewing unit switched off.
–
Loosen the screw 1.
–
Push the new needle into the drill-hole of needle bar 2 as far as it
will go.
ATTENTION !
The hollow groove 3 of the needle must point to the hook.
–
Tighten the screw 1.
ATTENTION !
After the changeover to another needle size the distance between
hook and needle has to be corrected (see service instructions).
2
3
1
1
15