1.
Description of product
The Dürkopp Adler 910 is a CNC sewing unit for free seam contours.
The seam contours can be programmed directly at the control panel
without any further devices.
Technical features
–
DAC control with control panel.
The following functions are available:
–
4 free seam contours with a total of 2800 available stitches can
be stored.
The coordinates are entered at the control panel.
No further devices are required.
–
4 sewing sample sequence programs with up to 4 sewing
samples per sewing sample sequence program can be created
and memorized.
–
The coordinates (teach-in) are entered with a precision of
0.5 or 1 mm respectively.
–
Counter of capacity and daily number of pieces.
–
The speed can be changed from 0 rpm (manual operation with
full operability of the x-y drive) up to 2500 rpm in
steps of 100 rpm.
–
Fabric drive via two step motors.
–
Drive of the sewing unit directly at the arm shaft via brushless
direct current motor.
–
Maximum sewing field size 120 x 60 mm.
–
Thread monitor and thread pulling device.
–
Oil wick lubrication of arm shaft and driving shaft by means of two
oil reservoirs.
–
Service and maintenance work is supported by comprehensive test
programs.
1
5