Operating; Threading The Needle Thread - Duerkopp Adler 550-867 Operating Instructions Manual

5

Operating

5.1

Threading the needle thread

3
7
10
Caution: Risk of Injury !
Turn off the main switch!
The needle thread may only be threaded with the sewing machine
being switched off.
2 1
Before putting in the needle thread cones they need to be scanned
with the hand scanner.
With thread barcode scanner equipment (optional):
–
Unscrew the ball 1.
–
Put the cone 2 on the stand and make sure that the barcode 4 on
the thread reel can be read by the optional thread barcode
scanner 5.
If the scanner does not recognize the barcode an error message
will appear on the monitor.
–
Tighten the reel with ball 1 and washer 3.
–
Lead the needle thread through the unwinder arm 6.
The unwinder arm must be in vertical position above the thread
reels.
–
Conduct the needle thread through the guiding tube 7.
6
5 4